The products are used to melt the crashed aluminum billets and deep processing scrap. There are a lot of important advantages of aluminum induction melting method such as high recovery ratio, small dust and smoke, free running and stop. Because of the clean scrap, the holding cover is helpful to increase the heat efficiency. For those nonferrous scrap metal, aluminum and copper for example, high recovery ratio guarantees high economic benefit.
The series of induction furnace is also very suitable and beneficial for melting other non ferrous metal, such as copper, zinc, nickel, chromium, and so on. For small volume furnace using to melting low melting point metal (such as aluminum, zinc, tin, etc.), sintering crucible such as graphite crucible, silicon carbon crucible can be placed inside the coil for melting. |
 |
| Parameters of GWL series Induction Furnace for Melting Aluminum: |
额定
容积
Rated
capacity
( t ) |
额定
功率
Rated
power
( KW ) |
额定
频率
Rated
frequency
( HZ ) |
变压器配置
Transformer configuration |
整流
脉数
pulses |
感应器
电压
Coil
voltage
( V ) |
熔化率
(1600℃)
Melting
rate
( t/h ) |
电耗
Energy
consumption
( kWh/t ) |
容量
Capacity
( KVA ) |
二次电压
Secondary voltage
( V ) |
| 1 |
550 |
1000 |
630 |
3φ690V |
6 |
2400 |
0.8 |
620 |
| 3 |
1500 |
500 |
1600 |
3φ690V |
6 |
2400 |
2.2 |
610 |
| 5 |
2500 |
500 |
3150 |
3φ1000V |
6 |
3200 |
4 |
580 |
| 10 |
4500 |
250 |
5000 |
6φ1000V |
12 |
3200 |
7 |
560 |
|
|